PS1000-A6-1216

技术参数节选 PS1000-A6-12.16

Electrical specifications
Efficiency 92.8 % at 120 V AC
94.3 % at 230 V AC
Power dissipation 14.9 W at 120 V AC
11.6 W at 230 V AC
Input
Voltage range 100 … 240 V AC (-15 %/+10 %), 50 … 60 Hz (±6 %)
110 … 150 V DC (±20 %)
Current 1.74 A at 120 V AC
0.92 A at 230 V AC
1.9 A at 110 V DC
for lower output currents see technical information
Inrush current 6 A peak at 120 V AC and ambient temperature 40 °C (104 °F)
9 A peak at 230 V AC and ambient temperature 40 °C (104 °F)
Capacity factor 0.99 at 120 V AC
0.96 at 230 V AC
Remote control terminals 15-, 16+
remote control for ON/OFF
Output
Rated voltage 12 V DC
Voltage range 12 … 15 V DC
factory setting: 12 V
Rated current 16 A
Current 19.2 … 15.4 A at ambient temperature < 45= °c= (113= °f)=>
16 … 12.8 A at ambient temperature 60 °C (140 °F)
12 … 9.6 A at ambient temperature 70 °C (158 °F)
linear power derating see technical information
Power 192 W
Ripple max. 50 mV pp
Hold-up time 50 ms at 120 V AC
50 ms at 230 V AC
Overload behavior continuous current : output voltage > 6.5 V DC
intermittent current : output voltage < 6.5= v=>
Short-circuit current typ. 55 A for up to 12 ms, load impedance < 30=>
Voltage limitation typ. 18.2 V DC
max. 19 V DC
Fault indication output
Connection terminals 13, 14
Output type relay contact DC OK
– contact is closed if the output voltage is > 90 % of the adjusted output voltage
Contact loading max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load
min. 1 mA at 5 V DC
Galvanic isolation
Input/Output SELV/PELV
Indicators/settings
Display elements LED green: status DC OK
– LED lights up if the output voltage is > 90 % of the adjusted output voltage
Control elements potentiometer
Configuration setting of the output voltage via potentiometer
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 ,
IEC/EN 61000-3-3
Low voltage
Directive 2014/35/EU EN 61010-1
RoHS
Directive 2011/65/EU (RoHS) IEC/EN 63000:2019
Conformity
Degree of protection EN 60529
Shock resistance EN 60068-2-27
Vibration resistance EN 60068-2-6
Ambient conditions
Ambient temperature -25 … 70 °C (-13 … 158 °F) , see technical information
Storage temperature -40 … 85 °C (-40 … 185 °F)
Relative humidity 5 … 95 %, noncondensing
Shock resistance 20 g , 11 ms or 30 g , 6 ms
Vibration resistance 2 … 17.8 Hz : ± 1.6 mm , 17.8 … 500 Hz : 2 g
Mechanical specifications
Housing material aluminum alloy , galvanized steel
Degree of protection IP20
Connection
Input/Output screw terminals
conductor cross section: max. 6 mm2 (AWG 20-10)
cable diameter: max. 2.8 mm, wire end ferrules included
stripped insulation length: 7 mm
tightening torque: max. 1 Nm
Relay contact output spring terminals
conductor cross section: max. 1.5 mm2 (AWG 24-16)
cable diameter: max. 1.6 mm, wire end ferrules included
stripped insulation length: 7 mm
Remote control spring terminals
conductor cross section: max. 1.5 mm2 (AWG 24-16)
cable diameter: max. 1.6 mm, wire end ferrules included
stripped insulation length: 7 mm
Mass approx. 600 g
Dimensions 39 x 124 x 117 mm (W x H x D) , without DIN mounting rail
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
ATEX approval
ATEX certificate EPS 15 ATEX 1101 X
ATEX marking II 3G Ex ec nC II T4 Gc
Directive conformity
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-7:2015+A1:2018 , EN 60079-15:2010
International approvals
UL approval E223176
IECEx approval
IECEx certificate IECEx EPS 20.0055X
IECEx marking Ex ec nC IIC T4 Gc
Standards IEC 60079-0:2017 , IEC 60079-7:2017 , IEC 60079-15:2017
General information
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see .

 

Classifications

System Classcode
ECLASS 13.0
ECLASS 12.0
ECLASS 11.0
ECLASS 10.0.1
ECLASS 9.0
ECLASS 8.0
ECLASS 5.1
ETIM 9.0 EC002542
ETIM 8.0 EC002542
ETIM 7.0 EC002542
ETIM 6.0 EC002542
ETIM 5.0 EC002542
UNSPSC 12.1